10-in-One tool holder "Manual"

The South Bend Ten-in-One Tool Block will replace practically all of the tool holders an boring bar holders ordinarily required. combining them into one practical easy-to-use unit which may be used for heavy duty operations or, because of its compactness, for smaller classes of work. An outstanding advantage is the screw adjustments for tool height which arc easily made and need never be changed until a change in the height of the cutting edge of the tool becomes necessary. Cutter bits may be removed, ground and replaced without the usual height adjustments. The tool block may be revolved to permit mounting the tools from either the right or the left hand side Instructions for using and a few of the many applications are shown in the diagrams below